Wall Switch Control EN Use the wall switch to turn on and off the ceiling light within 5 seconds, you can change the color temperature from warm yellow light, white light to night light by default. You can set the favorite light via the app. Note: Cycling the three light modes twice and pressing the wall switch again will restore the factory Use the wall switch to turn the ceiling light on and off seven times consecutively (turn off the ceiling light and wait for two seconds, then turn it on and wait for two seconds, this counts as one time). The ceiling light then starts breathing and automatically restarts Note:
When using the ceiling light in a new network environment, you need to restore the factory Replacing the Light Source 1. Remove the light source The ceiling light contains three light boards and three protective covers. Each light board is fixed to the base with two rivets and each protective cover is fixed to the light board and base with three rivets. When removing the light source, first uninstall the three rivets from the protective 15