Keyboard screws Hard drive screws (positions may vary) 4. Remove the keyboard by inserting your fingertips between the top row of keys (the F keys) and the case and then lifting. Then fold the keyboard gently forward so that it lies upside down on the table. Do not pull up on the keyboard. Keep the ribbon cables tucked in the case, otherwise you will need to tuck them back in with a paper clip. Hard drive Keyboard Ribbon cables 5. Handle the hard drive only by its edges to avoid damage from electrostatic discharge. Disengage the hard drive connectors by grasping the left Mylar flap and pulling to the right as shown. Lift up on the Mylar sheet and remove the hard drive.
The Mylar sheet stays in place. 53