Changing the bulbs Before changing the bulbs, always follow the instructions and warnings in the chapter entitled ”Safety instructions”! Changing the filament bulbs 1. Lift the bulb cover slightly. 2. Push the bulb cover towards the middle of the appliance. The description of changing the bulbs applies to several appliance models. NOTE: Observe the warranty regulations in the enclosed service booklet. Changing the halogen bulbs Halogen bulbs become very hot during operation. Even some time after the appliance has been switched off, there is still a risk of burns! Before changing the halogen bulbs, ensure that they have cooled down fully. 1.
Carefully remove the bulb ring with a suitable tool. 3. Replace the defective bulb with a new one of the same type and equivalent power (see rating plate). 2. Replace the defective bulb with a new one of the same type and equivalent power (see rating plate). NOTE: When inserting halogen bulbs, do not touch the glass tube. Therefore use a clean cloth when inserting the bulb. 5. Restore the power supply by inserting the mains plug or switching on the fuse. NOTE: If the light does not function, check whether the bulbs have been inserted correctly. Defective bulbs should be replaced immediately to avoid overloading the remaining bulbs. 3. Reinsert the bulb cover. 4.
Restore the power supply by inserting the mains plug or switching on the fuse. 12 4. Reinsert the bulb cov er.