Chapter 6: Advanced Chassis Setup Figure 6-5. Removing a SCSI Drive Carrier Figure 6-6. Mounting a SCSI Drive in a Carrier Important: Regardless of how many SCSI hard drives are in- stalled, all SCSI drive carriers must remain in the drive bays to ! promote proper airfl ow. 3. SCSI backplane All eight SCSI drives plug into a single SCSI backplane, which provides Ultra320 single-channel operation for all eight SCSI drives. A ribbon cable from JA1 on the serverboard should be connected to the IN connector on the SCSI backplane. There are also two power connectors on the backplane that must be connected.
See Figure 6-7 for the locations of backplane connectors - the reverse side of the backplane has fi ve connectors that the SCSI drives plug into when inserted with a SCSI drive carrier or mobile rack. 6-7