Chapter 7: BIOS Floppy Confi guration Floppy A Move the cursor to these fi elds via up and down keys to select the fl oppy type. The options are Disabled, 360 KB 5 1/4", 1.2 MB 5 1/4", 720 KB 3Ѕ", 1.44 MB 3Ѕ” , and 2.88 MB 3Ѕ". Floppy B Move the cursor to these fi elds via up and down keys to select the fl oppy type. The options are Disabled , 360 KB 5 1/4", 1.2 MB 5 1/4", 720 KB 3Ѕ", 1.44 MB 3Ѕ”, and 2.88 MB 3Ѕ". Onboard Floppy Controller Use this setting to Enable or Disable the onboard fl oppy controller. Super IO Confi guration Serial Port1 Address This option specifi es the base I/O port address and Interrupt Request address of serial port 1.
Select "Disabled" to prevent the serial port from accessing any system resources. When this option is set to Disabled , the serial port physically becomes unavailable. Select "3F8/IRQ4" to allow the serial port to use 3F8 as its I/O port address and IRQ 4 for the interrupt address. The options are Disabled, 3F8/IRQ4 , 3E8/IRQ4 and 2E8/IRQ3. Serial Port2 Address This option specifi es the base I/O port address and Interrupt Request address of serial port 2. Select "Disabled" to prevent the serial port from accessing any system resources. When this option is set to "Disabled", the serial port physically becomes unavailable.
Select "2F8/IRQ3" to allow the serial port to use 2F8 as its I/O port address and IRQ 3 for the interrupt address. The options are Disabled, 2F8/IRQ3 , 3E8/IRQ4 and 2E8/IRQ3. Serial Port 2 Mode Tells BIOS which mode to select for serial port 2. The options are Normal , IrDA and ASKIR. 7-5