A+ Server 4020A-8R User's Manual Parallel Port Address This option specifi es the I/O address used by the parallel port. Select Disabled to prevent the parallel port from accessing any system resources. When the value of this option is set to Disabled, the printer port becomes unavailable. Select 378 to allow the parallel port to use 378 as its I/O port address. The majority of parallel ports on computer systems use IRQ7 and I/O Port 378H as the standard setting. Select 278 to allow the parallel port to use 278 as its I/O port address. Select 3BC to allow the parallel port to use 3BC as its I/O port address. Parallel Port Mode Specify the parallel port mode.
The options are Normal , Bi-directional, EPP and ECP. Parallel Port IRQ Select the IRQ (interrupt request) for the parallel port. The options are IRQ5 and IRQ7 . ACPI Confi guration ACPI Aware OS Use this setting to tell BIOS if the operating system recognizes ACPI functions. The options are Yes and No. Advanced ACPI Confi guration ACPI 2.0 Support Select "Yes" if your system supports ACPI 2.0, which will add additional tables as per ACPI 2.0 specifi cations. Options are Yes and No . ACPI APIC Support Select "Enabled" to allow the ACPI APIC Table Pointer to be included in the RSDT pointer list. The options are Enabled and Disabled.
ACPI SRAT Table This setting allows you to enable or disable the building of an ACPI SRAT table. Options are Enabled and Disabled. 7-6