Supermicro A+ Server 4022G-6F — Supermicro A+ Server 4022G-6F User's Manual PDF Download

Chapter 5: Advanced Serverboard Setup Wake-On-LAN The Wake-On-LAN header is designated JWOL1. See the table on the right for pin definitions. You must have a LAN card with a Wake-On-LAN connector and cable to use the Wake-On-LAN feature. LAN1/2 (Ethernet Ports) Two Gigabit Ethernet ports (designated LAN1 and LAN2) are located beside the VGA port. Additionally, for the H8DG6/i-F serverboards, there is a dedicated LAN for IPMI on top of the two rear USB ports. These Ethernet ports accept RJ45 type cables. ATX PS/2 Keyboard and PS/2 Mouse Ports The ATX PS/2 keyboard and PS/2 mouse are located next to the Back Panel USB Ports 0/1 on the motherboard. See the table at right for pin definitions.

DOM Power Connector A power connector for SATA DOM (Disk_ On_Module) is located at JWF1. Connect the appropriate cable here to provide power support for your DOM devices. 5-19 Wake-On-LAN Pin Definitions (JWOL1) Pin# Definition 1 +5V Standby 2 Ground 3 Wake-up PS/2 Keyboard/Mouse Pin Definitions PS2 Keyboard PS2 Mouse Pin# Definition Pin# Definition 1 KB Data 1 Mouse Data 2 No Connection 2 No Connection 3 Ground 3 Ground 4 Mouse/KB VCC (+5V) 4 Mouse/KB VCC (+5V) 5 KB Clock 5 Mouse Clock 6 No Connection 6 No Connection VCC: with 1.5A PTC (current limit) DOM PWR Pin Definitions Pin# Definition 1 +5V 2 Ground 3 Ground