A + Se r ver 4022G-6F User's Manual Additional Hard Drives The SC745 chassis accepts a CSE-M35BP Supermicro mobile rack in place of the three bays just under the control panel. This configuration yields a total of thirteen hot-swap hard drives and no peripheral drives. Installing the M35 Mobile Rack 1. Open the chassis cover. 2. Press the drive tray release tabs (Figure 6-5). 3. Push all three drive trays forward and out of the chassis Figure 6-6. Add Rails to the Mobile Rack (Two shown as an example; install six.) Mobile Rack Rails 4. Remove the six drive tray rails (Figure 6-6). 5. Install all six rails onto the mobile rack. Each rail requires two screws.
Make sure the arrow on the rail points toward the front of the chassis (Figure 6-6). 6. Slide the mobile rack into the chassis. 6-8