A + Se r ver 4022G-6F User's Manual Mounting a SAS/SATA Drive in a Drive Carrier 1. Insert the drive into the carrier with the printed circuit board side facing down so that the mounting holes align with those in the carrier. 2. Secure the drive to the carrier with four screws. Figure 6-8. Mounting a Drive in a Carrier Caution : Use caution when working around the SAS/SATA backplane. Do not touch the backplane with any metal objects and make sure no cables touch the backplane or obstruct the airflow holes. SAS/SATA Backplane The SAS/SATA drives plug into a backplane.
Two cables must be connected from the serverboard to the appropriate connectors on the backplane to support eight SAS or SATA drives. You cannot cascade the backplane. 6-10