Single-axis controllers Control terminals 4 4.7 ”HighLine” version: Note! If the control terminals are completely wired, we recommend to use a cable cross-section of max. 0.75 mm 2 to save space. The mechanical cover can then be attached. ”StateLine” version: 4.7-7 EDS94SPP101 EN 3.1-04/2007 Terminal X3 Labelling Description SSP94000X3 GA AO1 GND analog signals Analog output 1 AO2 Analog output 2 A1+ Analog input 1 + A1- Analog input 1 - A1- Analog input 1 - A1R Terminating resistor for ±20mA A2+ Analog input 2 + A2- Analog input 2 - Shield connection: Fix the shield with EMC wire clamp. Terminal data Conductor cross-section Tightening torque [mm2] [AWG] [Nm] [lb-in] Flexible 0.2 ...
2.5 24 ... 12 Spring terminal With wire end ferrule Terminal X3 Labelling Description SSP94SL0X3 GA GND analog signals A1+ Analog input 1 + A1- Analog input 1 - A1- Analog input 1 - A1R Terminating resistor for ±20mA Shield connection: Fix the shield with EMC wire clamp.