A90 series Inverter User Guide 44 F00.12 Synthetic Gain of Main and Auxiliary Frequency 0.0 - 300.0 % 100.0 ● F00.13 Analog Adjustment of Synthetic Frequency 0: Synthetic Frequency of Main and Auxiliary Channels 1: AI1 * Synthetic Frequency of Main and Auxiliary Channels 2: AI2 * Synthetic Frequency of Main and Auxiliary Channels 0 〇 F00.14 Acceleration Time 1 0.00 - 650.00 (F15.13=0) 0.0 - 6500.0 (F15.13=1) 0 - 65000 (F15.13=2) s 15.00 ● F00.15 Deceleration Time 1 0.00 - 650.00 (F15.13=0) 0.0 - 6500.0 (F15.13=1) 0 - 65000 (F15.13=2) s 15.00 ● F00.16 Maximum Frequency 1.00 - 600.00 Hz 50.00 〇 F00.17 Upper Limit Frequency Control Options 0: Set through F00.18 1: AI1 2: AI2 3~5: Not Used 6:
Upper Limit Frequency Communication Percentage Setting 7: Upper Limit Frequency Communication Direct Setting 0 〇 F00.18 Upper Limit Frequency Lower Limit Frequency F00.19 - Maximum Frequency F00.16 Hz 50.00 ● F00.19 Lower Limit Frequency 0.00 - Upper Limit Frequency F00.18 Hz 0.00 ● F00.20 Running Direction 0: Forward 1: Reverse 0 ● F00.21 Reverse Control 0: Permit Forward/Reverse 1: Prohibit Reverse 0 〇 F00.22 F/R Deadband Time 0.00 - 650.00 s 0.00 ● F00.23 Carrier Frequency 1.0～16.0（A90-4T1R5B～ A90-4T9R4B） 1.0～10.0（A90-4T013B～A90-4T017B） 1.0～8.0（A90-4T025B～A90-4T110） 1.0～6.0（A90-4T150～A90-4T304） kHz 4.0 (A90-4T 017B and smaller) 2.0 ● F00.24 Automatic Adjustment of Carrier Wave 0:
Disabled 1: Enabled 1 2: Enabled 2 1 〇 F00.25 Carrier Frequency Noise Suppression 0: Disabled 1: Enabled 0 〇 F00.27 Noise Suppression Intensity 10 - 150 Hz 100 ●