User Manual of A90 Series Inverter stall fault. When the continuous stall time exceeds the set value of F07.28, the driver will report a In the stall status, the driver will perform automatic control according to the set value of F07.29. The intensity setting depends on the on-site application, instead of maximization. 7.9 Multi-segment Speed and Simple PLC Parameter Group of F08 Group 188 Default Function code Function code name Parameter description Unit Attribute setting F07.28 Stall fault detection time 0.0-6000.0 (0.0:
no stall fault detection) s 0.0 ○ F07.29 Stall control intensity 0 - 100 % 100 ○ Function Function code Default Parameter description Unit Attribute code name setting F08.00 Multi-segment speed 1 0.00 to maximum frequency F00.16 Hz 0.00 ● F08.01 Multi-segment speed 2 0.00 to maximum frequency F00.16 Hz 5.00 ● F08.02 Multi-segment speed 3 0.00 to maximum frequency F00.16 Hz 10.00 ● F08.03 Multi-segment speed 4 0.00 to maximum frequency F00.16 Hz 15.00 ● F08.04 Multi-segment speed 5 0.00 to maximum frequency F00.16 Hz 20.00 ● F08.05 Multi-segment speed 6 0.00 to maximum frequency F00.16 Hz 25.00 ● F08.06 Multi-segment speed 7 0.00 to maximum frequency F00.16 Hz 30.00 ● F08.07 Multi-segment speed 8 0.00 to maximum frequency F00.16 Hz 35.00 ● F08.08 Multi-segment speed 9 0.00 to maximum frequency F00.16 Hz 40.00 ● F08.09 Multi- speed 10 0.00 to maximum frequency F00.16 Hz 45.00 ● F08.10 Multi-segment speed 11 0.00 to maximum frequency F00.16 Hz 50.00 ● F08.11 Multi-segment speed 12 0.00 to maximum frequency F00.16 Hz 50.00 ●