User Manual of A90 Series Inverter 246 F18.09 DC bus voltage Display the current bus voltage. Scope: 0 - 1200. V F18.10 Simple PLC running times When the auxiliary frequency source B is involved in setting (F00.06 ≠ 0), the setting mode is “11: simple PLC” (F00.05=11) and the simple PLC runs in the mode of limited cycles (F08.15=1/2), the real-time number of cycles will be displayed. “0” indicates that the first operation is being performed, and “1” indicates that the first operation has been completed and the second operation is being carried out. Scope: 0 - F08.16.
F18.11 Simple PLC operation stage When the auxiliary frequency source B is involved in setting (F00.06 ≠ 0), and the setting mode is “11: simple PLC” (F00.05=11), the real-time PLC running status will be displayed. Scope: 1-15, corresponding to the multi-segment speed 1 (F08.00) to multi-segment speed 15 (F08.14). F18.12 PLC running time at the current stage When the auxiliary frequency source B is involved in setting (F00.06 ≠ 0) and the setting mode is “11: simple PLC” (F00.05=11), the PLC running time at the current stage will be displayed in a real-time manner. Scope: 0.0 to the set time of the corresponding segment (example: the time of the first segment is dependent on F08.20).
s / min F18.13 Reserved F18.14 Load rate Display the current load speed. For the correct display, please set the load speed display factor (F12.09). Scope: 0 - 65535. rpm F18.15 UP/DOWN offset frequency Display the UP/DOWN offset frequency. See the UP/DOWN function description of F12.10 to F12.12. HHz F18.16 PID setting Display the current PID setting, except for the current setting percentage (F09.03). F18.17 PID feedback Display the current PID feedback, except for the current feedback percentage (F09.03). F18.18 Power meter: MWh Display the cumulative input (output + fan) power consumption in MWh (thousand KWh). The current power consumption can be obtained in conjunction with F18.19.
MW h F18.19 Watt-hour meter: kWh Display the cumulative input (output + fan) power consumption in kWh (kilowatt-hour). The current power consumption can be obtained in conjunction with F18.18. kW h F18.20 Output power Display the current output power of the inverter. Scope: 0.00 - 650.00. kW F18.21 Output power factor Display the current output power factor of the inverter. Scope: -1.00 - 1.00. F18.22 Digital input Display the current valid status of the input terminals X1