User Manual of A90 Series Inverter ★ This function code cannot be used to change the parameters of the attribute “○” (it cannot be changed during operation). That is, only the parameters of the attribute “●” (it can be changed during operation) can be changed. Otherwise, the error code 1 will be returned. 12.3.3.4 0x08: function code for diagnosis The Modbus function code 08 involves a series of tests to check the communication system between the client (master station) and server (slave station), or internal error statuses of the server. The test to be executed is defined by the sub-function code fields of two bytes in the request. The server makes responses properly.
remote terminal unit to return the corresponding data through the data field in normal Copy the function codes and sub-function codes. Some diagnoses will enable the response. Under normal circumstances, when the diagnosis function is sent to the remote terminal unit, the user program in this remote terminal unit will not be affected. The user logic cannot be accessed by diagnosis, such as: discrete magnitude and register. The error counter in the remote terminal unit can be remotely reset by applying some functions.
278 Starting address Hi 00 Starting address 00 03 Hi Exception Starting address Lo 0E Starting address 0E code Lo Number (Hi) of registers 00 Number (Hi) of 00 registers Number (Lo) of registers 02 Number (Lo) of 02 registers Number of bytes 04 Register value Hi 01 (F00.14) Register value Lo F4 (F00.14) Register value Hi 02 (F00.15) Register value Lo 58 (F00.15)