Constraints Constraints VPARAMETER 5220 Defines the edge detection constraints of an Arc Locator tool or an Edge Locator tool. Constraints can be set for position and/or magnitude and are used to score edges. Syntax Micro V+ VPARAMETER (sequence_id, tool_id, 5220, index_id, object_id) = value value = VPARAMETER (sequence_id, tool_id, 5220, index_id, object_id) V+ VPARAMETER (sequence_id, tool_id, 5220, index_id, object_id) $ip = value value = VPARAMETER ($ip, sequence_id, tool_id, 5220, index_id, object_id) Type Long Range Parameters ACE Reference Guide, 18317-000 Rev A Page 162 Value Constraints NAme Description 0 hsNone No constraint. 1 hsPosition Position constraint.
2 hsMagnitude Magnitude constraint. 3 hsAllConstraints Magnitude and position $ip IP address of the vision server. Applies to V+ syntax only. Uses standard IP address format, for example: 192.168.1.120. sequence id _ Index of the vision sequence. The first sequence is 1. tool id _ Index of the tool in the vision sequence. The first tool is 1.