EdgeFilterHalfWidth EdgeFilterHalfWidth VPARAMETER 5203 Half-width of the convolution filter used to compute the edge magnitude curve from which actual edges are detected. The filter approximates the first derivative of the projection curve. The half width of the filter should be set in order to match the width of the edge in the projection curve (the extent of the greyscale transition expressed in number of pixels).
Syntax Micro V+ VPARAMETER (sequence_id, tool_id, 5203, index_id, object_id) = value value = VPARAMETER (sequence_id, tool_id, 5203, index_id, object_id) V+ VPARAMETER (sequence_id, tool_id, 5203, index_id, object_id) $ip = value value = VPARAMETER ($ip, sequence_id, tool_id, 5203, index_id, object_id) Type Long Range Minimum: 1 Maximum: 25 Parameters ACE Reference Guide, 18317-000 Rev A Page 209 $ip IP address of the vision server. Applies to V+ syntax only. Uses standard IP address format, for example: 192.168.1.120. sequence id _ Index of the vision sequence. The first sequence is 1. tool id _ Index of the tool in the vision sequence. The first tool is 1. ID 5203:
the value used to reference this property. index id _ N/A object id _ N/A