ParametersBasedOn Parameters ACE Reference Guide, 18317-000 Rev A Page 432 Value Detection Mode Description -1 hsContourParametersCustom The contour detection parameters are set manually. Integer from 1 - 10 Integer specifying the index of a model The contour detection parameters of the specified model are used. sequence id _ Index of the vision sequence. The first sequence is 1. tool id _ Index of the tool in the vision sequence. The first tool is 1. ID 304: the value used to reference this property. index id _ N/A object id _ N/A $ip IP address of the vision server. Applies to V+ syntax only. Uses standard IP address format, for example: 192.168.1.120.