PerimeterResultsEnabled PerimeterResultsEnabled VPARAMETER 1602 Enables the computation of the following blob properties: BlobRawPerimeter, BlobConvexPerimeter and BlobRoundness. Syntax Micro V+ VPARAMETER (sequence_id, tool_id, 1602, index_id, object_id) = value value = VPARAMETER (sequence_id, tool_id, 1602, index_id, object_id) V+ VPARAMETER (sequence_id, tool_id, 1602, index_id, object_id) $ip = value value = VPARAMETER ($ip, sequence_id, tool_id, 1602, index_id, object_id) Type Boolean Range Parameters ACE Reference Guide, 18317-000 Rev A Page 442 Value Description 1 The perimeter properties will be computed. 0 No perimeter properties will be computed.
$ip IP address of the vision server. Applies to V+ syntax only. Uses standard IP address format, for example: 192.168.1.120. sequence id _ Index of the vision sequence. The first sequence is 1. tool id _ Index of the tool in the vision sequence. The first tool is 1. ID 1602: the value used to reference this property.