Calculated Point Properties Calculated Point Properties The Calculated Point can be calculated based on the intersection two lines, a line and a circle, or midway between two points. A Calculated Point tool is also used to place a fixed point in the field of view. A fixed point could be used if you want to make all your measurements from a known reference point.. This tool calculates a point based on a specific calculation mode. Possible modes are:
• Midpoint (midpoint between two points) • Point and a line (closet point on the line to another point) • Point and an arc (closest point on the arc to another point) • Fixed point • A line and an arc (Line/Arc intersection) • Two lines (Line-line intersection) • Two arcs (Arc-arc intersection) ElapsedTime VRESULT 1001 R - O Double FrameTranslationX VRESULT 2400 R - O Double FrameTranslationY VRESULT 2401 R - O Double InstanceCount VRESULT 1310 R - O Long InstanceLocation VLOCATION 1311 R - O Location InstanceRobotLocation VLOCATION 1371 R - O Location ResultCount VRESULT 1010 R - O Long ShowResultsGraphics VPARAMETER 150 R / W Boolean ACE Reference Guide, 18317-000 Rev A Page 592 Property Name V+/MicroV+ Keyword V+/MicroV+ ID Access Type