ArithmeticConstant ArithmeticConstant VPARAMETER 5361 Constant applied by an arithmetic operation when no valid operand image is specified. Syntax Micro V+ VPARAMETER (sequence_id, tool_id, 5361, index_id, object_id) = value value = VPARAMETER (sequence_id, tool_id, 5361, index_id, object_id) V+ VPARAMETER (sequence_id, tool_id, 5361, index_id, object_id) $ip = value value = VPARAMETER ($ip, sequence_id, tool_id, 5361, index_id, object_id) Type Long Range Minimum: 1 Maximum: 256 Parameters ACE Reference Guide, 18317-000 Rev A Page 77 $ip IP address of the vision server. Applies to V+ syntax only. Uses standard IP address format, for example: 192.168.1.120.
sequence id _ Index of the vision sequence. The first sequence is 1. tool id _ Index of the tool in the vision sequence. The first tool is 1. ID 5361: the value used to reference this property. index id _ N/A object id _ N/A