AutoCoarsenessSelectionEnabled AutoCoarsenessSelectionEnabled VPARAMETER 5421 When is set to True, the value of SearchCoarseness is automatically determined by the Pattern Locator process when the pattern is learned. Syntax Micro V+ VPARAMETER (sequence_id, tool_id, 5421, index_id, object_id) = value value = VPARAMETER (sequence_id, tool_id, 5421, index_id, object_id) V+ VPARAMETER (sequence_id, tool_id, 5421, index_id, object_id) $ip = value value = VPARAMETER ($ip, sequence_id, tool_id, 5421, index_id, object_id) Type Long Range Parameters ACE Reference Guide, 18317-000 Rev A Page 82 Value Description 1 The Coarseness levels are automatically determined and set by the tool.
0 The Coarseness levels are set by the user. $ip IP address of the vision server. Applies to V+ syntax only. Uses standard IP address format, for example: 192.168.1.120. sequence id _ Index of the vision sequence. The first sequence is 1. tool id _ Index of the tool in the vision sequence. The first tool is 1. ID 5421: the value used to reference this property.