cisco — Configuring the Time Zone

Configuring the Time Zone Follow these steps to manually configure the time zone: Procedure Administering the Device Configuring the Time Zone Command or Action Purpose Step 2 Use one of the following: • clock set hh:mm:ss day month year • clock set hh:mm:ss month day year Example: Device# clock set 13:32:00 23 March 2013 Manually set the system clock using one of these formats: • hh:mm:ss—Specifies the time in hours (24-hour format), minutes, and seconds. The time specified is relative to the configured time zone. • day—Specifies the day by date in the month. • month—Specifies the month by name. • year—Specifies the year (no abbreviation). Command or Action Purpose Step 1 enable Example:

Device> enable Enables privileged EXEC mode. • Enter your password if prompted. Step 2 configure terminal Example: Device# configure terminal Enters global configuration mode. Step 3 clock timezone zone hours-offset [minutes-offset] Example: Device(config)# clock timezone AST -3 30 Sets the time zone. Internal time is kept in Coordinated Universal Time (UTC), so this command is used only for display purposes and when the time is manually set. • zone—Enters the name of the time zone to be displayed when standard time is in effect. The default is UTC. • hours-offset—Enters the hours offset from UTC. • (Optional) minutes-offset—Enters the minutes offset from UTC.

This available Administering the Device 10