cisco — Configuring Summer Time (Daylight Saving Time)

Configuring Summer Time (Daylight Saving Time) To configure summer time (daylight saving time) in areas where it starts and ends on a particular day of the week each year, perform this task: Procedure Administering the Device Configuring Summer Time (Daylight Saving Time) Command or Action Purpose where the local time zone is a percentage of an hour different from UTC. Step 4 end Example: Device(config)# end Returns to privileged EXEC mode. Step 5 show running-config Example: Device# show running-config Verifies your entries. Step 6 copy running-config startup-config Example: Device# copy running-config startup-config (Optional) Saves your entries in the configuration file.

Command or Action Purpose Step 1 enable Example: Device> enable Enables privileged EXEC mode. • Enter your password if prompted. Step 2 configure terminal Example: Device# configure terminal Enters global configuration mode. Step 3 clock summer-time zone date date month year hh:mm date month year hh:mm [offset]] Example: Device(config)# clock summer-time PDT Configures summer time to start and end on specified days every year. Administering the Device 11