cisco — Configuring Summer Time (Daylight Saving Time)

Administering the Device Configuring Summer Time (Daylight Saving Time) Command or Action Purpose date 10 March 2013 2:00 3 November 2013 2:00 Step 4 clock summer-time zone recurring [week day month hh:mm week day month hh:mm [offset]] Example: Device(config)# clock summer-time PDT recurring 10 March 2013 2:00 3 November 2013 2:00 Configures summer time to start and end on the specified days every year. All times are relative to the local time zone. The start time is relative to standard time. The end time is relative to summer time. Summer time is disabled by default.

If you specify clock summer-time zone recurring without parameters, the summer time rules default to the United States rules. If the starting month is after the ending month, the system assumes that you are in the southern hemisphere. • zone—Specifies the name of the time zone (for example, PDT) to be displayed when summer time is in effect. • (Optional) week— Specifies the week of the month (1 to 4, first, or last). • (Optional) day—Specifies the day of the week (Sunday, Monday...). • (Optional) month—Specifies the month (January, February...). • (Optional) hh:mm—Specifies the time (24-hour format) in hours and minutes.

• (Optional) offset—Specifies the number of minutes to add during summer time. The default is 60. Step 5 end Example: Device(config)# end Returns to privileged EXEC mode. Step 6 show running-config Example: Device# show running-config Verifies your entries. Step 7 copy running-config startup-config Example: (Optional) Saves your entries in the configuration file. Administering the Device 12