cisco — Configuring MAC Address Move Notification Traps

Procedure Administering the Device Configuring MAC Address Move Notification Traps Command or Action Purpose Step 1 enable Example: Device> enable Enables privileged EXEC mode. • Enter your password if prompted. Step 2 configure terminal Example: Device# configure terminal Enters global configuration mode. Step 3 snmp-server host host-addr {traps | informs} {version {1 | 2c | 3}} community-string notification-type Example: Device(config)# snmp-server host 172.20.10.10 traps private mac-notification Specifies the recipient of the trap message. • host-addr—Specifies the name or address of the NMS. • traps (the default)—Sends SNMP traps to the host. • informs—Sends SNMP informs to the host.

• version—Specifies the SNMP version to support. Version 1, the default, is not available with informs. • community-string—Specifies the string to send with the notification operation. Though you can set this string by using the snmp-server host command, we recommend that you define this string by using the snmp-server community command before using the snmp-server host command. • notification-type—Uses the mac-notification keyword. Step 4 snmp-server enable traps mac-notification move Example: Device(config)# snmp-server enable traps mac-notification move Enables the device to send MAC address move notification traps to the NMS. Administering the Device 29