What to do next To disable MAC address-move notification traps, use the no snmp-server enable traps mac-notification move global configuration command. To disable the MAC address-move notification feature, use the no mac address-table notification mac-move global configuration command. You can verify your settings by entering the show mac address-table notification mac-move privileged EXEC commands. Configuring MAC Threshold Notification Traps When you configure MAC threshold notification, an SNMP notification is generated and sent to the network management system when a MAC address table threshold limit is reached or exceeded.
Follow these steps to configure the switch to send MAC address table threshold notification traps to an NMS host: Procedure Administering the Device Configuring MAC Threshold Notification Traps Command or Action Purpose Step 5 mac address-table notification mac-move Example: Device(config)# mac address-table notification mac-move Enables the MAC address move notification feature. Step 6 end Example: Device(config)# end Returns to privileged EXEC mode. Step 7 show running-config Example: Device# show running-config Verifies your entries. Step 8 copy running-config startup-config Example: Device# copy running-config startup-config (Optional) Saves your entries in the configuration file.
Command or Action Purpose Step 1 enable Example: Enables privileged EXEC mode. • Enter your password if prompted. Administering the Device 30