The alarm is now set. System Armed Beeeep The current date and time automatically appears. TUE 23 APR 07.40 A RMING A SYSTEM WITH OPEN ZONES When arming (switching on) the system, you may get the message ‘Open Zone(s)’ along with a list of the zones in the premises that have not yet been closed. You should close these zones and then retry arming the system. However, occasionally you may not be able to close an open zone because, for example, a door lock or magnetic contact may be malfunctioning. You can exclude this open zone from the system (called inhibiting a zone).
Only use this exclusion option when absolutely necessary as any inhibiting of zones will reduce the security level of your system. Although you can exclude an open zone when the tamper alarm has been triggered (identified by the letter ‘T’ in front of the open zone listed), you will not be able to arm the system until the tamper alarm has been rectified. 1. Go to the keypad. The current date and time appear on the display. An example is shown. TUE 23 APR 08.21 2. Press the key 0 and then enter your code. A ‘*’ appears in the display for every key you press. Use the 0 key to cancel an incorrect entry and to restart a new entry code. Enter Code 0 + code Enter Code **** Arm Menu 3.
Press the Accept key. ! Normal Set 4. Press the Accept key again. ! Normal Set " System Arming The system has identified zones in the premises that are not properly closed. Open Zone(s) It then proceeds to list the open zone(s). In this example, zone 2 ‘Hall’ is open. 002 Hall 5. Press "$ "$ "$ "$ to exclude a zone from the system. " Inhibit Zone ___ Page 8 User Manual for CD72/95/15003