Delta Electronics AH — 9.3.5. Others

AH Motion Controller – Operation Manual _9 9-62 Error Code Description Corrective action 16#9B34 An error occurs when COM2 communicates with slave 20 by MODBUS. 1. Check the communication setting between the connecting devices. 2. Check if the communication cable is damaged. 16#9B35 An error occurs when COM2 communicates with slave 21 by MODBUS. 1. Check the communication setting between the connecting devices. 2. Check if the communication cable is damaged. 16#9B36 An error occurs when COM2 communicates with slave 22 by MODBUS. 1. Check the communication setting between the connecting devices. 2. Check if the communication cable is damaged.

16#9B37 An error occurs when COM2 communicates with slave 23 by MODBUS. 1. Check the communication setting between the connecting devices. 2. Check if the communication cable is damaged. 16#9B38 An error occurs when COM2 communicates with slave 24 by MODBUS. 1. Check the communication setting between the connecting devices. 2. Check if the communication cable is damaged. 16#9B39 An error occurs when COM2 communicates with slave 25 by MODBUS. 1. Check the communication setting between the connecting devices. 2. Check if the communication cable is damaged. 16#9B3A An error occurs when COM2 communicates with slave 26 by MODBUS. 1. Check the communication setting between the connecting devices.

2. Check if the communication cable is damaged. 16#9B3B An error occurs when COM2 communicates with slave 27 by MODBUS. 1. Check the communication setting between the connecting devices. 2. Check if the communication cable is damaged. 16#9B3C An error occurs when COM2 communicates with slave 28 by MODBUS. 1. Check the communication setting between the connecting devices. 2. Check if the communication cable is damaged. 16#9B3D An error occurs when COM2 communicates with slave 29 by MODBUS. 1. Check the communication setting between the connecting devices. 2. Check if the communication cable is damaged. 16#9B3E An error occurs when COM2 communicates with slave 30 by MODBUS. 1.

Check the communication setting between the connecting devices. 2. Check if the communication cable is damaged. 16#9B3F An error occurs when COM2 communicates with slave 31 by MODBUS. 1. Check the communication setting between the connecting devices. 2. Check if the communication cable is damaged.