Chapter 9 Troubleshooting 9.5.2. Hardware limit errors When the servo drive is driving a motion, the servo will stop when CWL(Clockwise limit) or CCWL(Counterclockwise limit) is On, no matter it’s running forward or reversely. AL014(CWL) or AL015(CCWL) will indicate such error. Servo status CWL (AL014) Clockwise limit Clears the alarm message on the servo display CWL=Off after FWD CCWL (AL015) Counterclockwise limit CCWL=Off after REV Error handling process ErrorID 0x3801 Hard -war e limit On State: ErrorStop State: Standstill FWD/ REV to proper position In motion MC_ Reset 9_ 9-79