AH Motion Controller – Operation Manual The formula of filter frequency and time: Filter frequency (f)*= 1/2(filter time t) (Hz): refer to the table below. If the input frequency is higher than it is stated in the range below. The signal will be filtered out. *The filter frequency should be corresponding to the response characteristic, refer to AH Motion Controller Hardware Manual for more details. This function is for DFB_Capture2, DFB_Hcnt, DFB_HTmr, DFB_Compare, and the X inputs used in the IO interrupts. _4 4.5 Creating a Program The following sections will lead users to create a traditional ladder diagram in ISPSoft.
The contents of the following yourselves with the basic abilities to create a traditional ladder diagram in a short time. sections include creating a POU, editing a traditional diagram, and compiling a program. You are expected to equip 4-18 t (0.1u) f (Hz) 1 5M 25 200K 100 50K 250 20K 1000 5K 2500 2K 10000 500