Chapter 4 Operating ISPSoft After the item is double-clicked, a window will appear. You can add items which will be monitored to the window. If you want to add an item to the window, you have to double-click the blank in the monitoring table, or type a device name directly, and type a start address and the number of devices which will be monitored in the Device Monitor Input window. Please notice that 100 items at most can be added to a monitoring table. You can press Insert on the keyboard to switch between inserting an item in the monitoring table and replacing an item in the monitoring table. The mode which is selected is displayed in the status bar in ISPSoft.
4_ mode is selected, the item added will overwrite the item selected in the monitoring table. If the insertion mode is selected, the item added will be above the item selected in the monitoring table. If the replacement and unselect certain items. After an item is unselected, the corresponding column will disappear. If you want to hide certain columns in the monitoring table, you can right-click the monitoring table, point to Set the Fields , 4-45