Chapter 3 Specifications for Products AH10DNET-5A 10DNET 12 1. Address knobs It is used to set the node address of AH10DNET-5A on a DeviceNet network. (Node addresses range from 0 to 63.) Example: If users want to set the communication address of AH10DNET-5A to 26, they can turn the knob corresponding to x10 1 to 2, and turn the knob corresponding to x10 0 to 6. Points for attention: When the power supply is cut off, the node address is set. After the setting of the node address is complete, AH10DNET-5A can be supplied with power. If AH10DNET-5A is running, changing the node address is unavailable. Please use a slotted screwdriver to turn the knobs with care, and do not scrape them.
3-61 2 3 4 5 MS 6 N S 7 x101 x100 D R 1 D R 0 IN 1 IN 0 Nod e Ad dress 9 8 11 10 Number Name Description 1 Mo del name Model name of the module Se 2 dis ven-segment Display play 3 Ad dress knobs Setting the address 4 Fu nction switch Setting the functions 5 De viceNet connector DeviceNet is used to interconnect control devices for data exchange. 6 MS LED indicator Indicating the status of the module 7 NS LED indicator Indicating the status of the network Re 8 blo movable terminal Terminals for wiring ck 9 Lab el Nameplate 10 Set screw Fixing the module 11 Co nnector Connecting the module and a backplane.
12 Pro jection Fixing the module Setting Description 0…63 Available nodes on a DeviceNet network 64…99 Unavailable nodes on a DeviceNet network