Chapter 5 Wiring 5.8.2 Wiring AH10EN-5A RJ45 communication port 5.8.3 Wiring AH10SCM-5A RS-485/RS-422 communication port 5.8.4 Wiring AH15SCM-5A RS-232 COM Port communication port 5.8.5 Wiring AH10PFBM-5A/AH10PFBS-5A 5.8.5.1 Connecting the PROFIBUS-DP Connector Insert the PROFIBUS-DP connector into the communication port on AH10PFBM-5A/AH10PFBS-5A. Tighten the screws on the PROFIBUS-DP connector to ensure that AH10PFBM-5A/AH10PFBS-5A is reliably connected to the PROFIBUS-DP connector.
5-55 Pin Signal Description 1 TX+ Transmitting data (positive pole) 2 TX- Transmitting data (negative pole) 3 RX+ Receiving data (positive pole) 4 -- N/C 5 -- N/C 6 RX- Receiving data (negative pole) 7 -- N/C 8 -- N/C Pin RS-485 RS-422 1 N/C TX+ 2 N/C TX- 3 D+ RX+ 4 D- RX- 5 SG SG 6 N/C SG Pin RS-485 5 4 3 2 1 9 8 7 6 1 N/C 2 TX 3 RX 4 N/C 5 GND 6 N/C 7 N/C 8 N/C 9 N/C