AH500 Hardware Manual 5.9.2 Wiring AHRTU-PFBS-5A 5.9.2.1 Connecting the PROFIBUS-DP Connector Insert the PROFIBUS-DP connector into the communication port on AHRTU-PFBS-5A. Tighten the screws on the PROFIBUS-DP connector to ensure that AHRTU-PFBS-5A is reliably connected to the PROFIBUS-DP connector. 5.9.2.2 Definitions of the Pins in the PROFIBUS- DP Port 5.9.2.3 Setting a PROFIBUS Node Address by the Knobs The address knobs on AHRTU-PFBS-5A are used to set the node address of AHRTU-PFBS-5A on a PROFIBUS-DP network. They are knobs which can be turned. One knob corresponds to x16 0 , and the other node corresponds to x16 1 . Setting range:
0~F 5-60 Pin Definitio n Description 9 5 6 1 1 -- N/C 2 -- N/C 3 RxD/TxD- P Receiving/Sending data (P (B)) 4 -- N/C 5 DGND Data reference potential (C) 6 VP Supplying positive voltage (5 V) 7 -- N/C 8 RxD/TxD- N Receiving/Sending data (N (A)) 9 -- N/C Address Definition 1 x16 0 x16 H’1~H’7D Valid PROFIBUS node address H’0 or H’7E~H’FF Invalid PROFIBUS node address