Mitsubishi — 5.10.1 Specifications for Motion Control Modules

Chapter 5 Wiring Description of the terminals 5-65 Specifications Item AH05PM-5A Single axis: 1M PPS Maximum speed Multi-axis interpolation: 1M PPS Input Detector X0.0, X0.1, X0.8, X0.9, X0.12, and X0.13 signal Output Servo output Y0.0+, Y0.0-, Y0.2+, Y0.2-, Y0.1+, Y0.1-, Y0.3+, Y0.3-, Y0.8, and Y0.9 signal signal External communication port Mini USB port Number of basic instructions 27 Number of applied 130 instructions 1. OX0~OX99 (motion subroutine/positioning program): M02 (The execution of the program stops. (END)) M-code 2. M00~M01, M03~M101, and M103~M65535: The execution of the program pauses. (WAIT) Users can use them freely.

G0 (rapid positioning), G1 (linear interpolation), G2 (circular interpolation, clockwise), G3 (circular interpolation, counterclockwise), G4 (dwell), G17 G-code (XY plane selection), G90 (absolute programming), and G91 (incremental programming) Terminal Description Response Maximum input characteristic Curren t Voltage X0.0, X0.1, X0.8, X0.9, X0.12, and X0.13 1. They are single/A/B-phase input terminals. 2. The functions of the terminals:  Motion control:  X0.0 is the PG input for axis 1, and X0.1 is the PG input for axis 2.  X0.12 is the DOG input for axis 1, and X0.13 is the DOG input for axis 2.  X0.8 and X0.9 are for a manual pulse generator.  High-speed count:

 X0.0 is the RESET input for counter 0.  X0.8 is the A-phase input for counter 0, and X0.9 is the B-phase input for counter 0.  High-speed comparison and catch: The terminals can function as trigger signals for high-speed catches.  Interrupt input terminals: X0.8, X0.9, X0.12, X0.13 100 kHz (*1) 15 mA 24 V Y0.8 and Y0.9 1. The high-speed pulse output terminals are transistors whose collectors are open collectors. 2. The functions of the terminals:  Motion control: Y0.8 is the CLEAR output for axis 1, and Y0.9 is the CLEAR output for axis 2.  High-speed comparison and catch: The high-speed comparison output terminals provide the PWM function. 200 kHz 15 mA 24 V Y0.0+, Y0.0-, 1.

They are differential output terminals. 2. The function of the terminals: 1 MHz 5 mA 5 V Y0.1+, Y0.1-,