Mitsubishi — 5.10.1 Specifications for Motion Control Modules

Chapter 5 Wiring Description of the terminals 5-69 Item AH15PM-5A Mini USB port External communication port Ethernet port Mini SD card Expansion storage device The maximum capacity is 32 GB. Number of basic instructions 27 Number of applied 130 instructions 1. OX0~OX99 (motion subroutine/positioning program): M02 (The execution of the program stops. (END)) M-code 2. M00~M01, M03~M101, and M103~M65535: The execution of the program pauses. (WAIT) Users can use them freely.

G0 (rapid positioning), G1 (linear interpolation), G2 (circular interpolation, clockwise), G3 (circular interpolation, counterclockwise), G4 (dwell), G17 G-code (XY plane selection), G18 (ZX plane selection), G19 (YZ plane selection), G90 (absolute programming), and G91 (incremental programming) Terminal Description c Response c Maximum input haracteristi Curren t Voltage X0.0+, X0.0-, X0.1+, X0.1-, X0.2+, X0.2-, X0.3+, and X0.3- 1. They are differential input terminals. 2. The functions of the terminals:  Motion control: They are the PG input terminals for axis 1~axis 4.  High-speed counter: X0.0+ and X0.0- are the RESET input terminals for counter 0.

X0.1+ and X0.1- are the RESET input terminals for counter 1. X0.2+ and X0.2- are the RESET input terminals for counter 2 and counter 4. X0.3+ and X0.3- are the RESET input terminals for counter 3 and counter 5.  High-speed comparison and catch: The terminals can function as trigger signals for high-speed catches.  Interrupt input terminals 200 kHz 15 mA 5~24 V X0.4, X0.5, X0.6, and X0.7 1 They are single/A/B-phase input terminals. 2 The functions of the terminals:  Motion control: They are the DOG input terminals for axis 1~axis 4. 100 kHz (*1) 15 mA 24 V X0.8+, X0.8-, X0.9+, and X0.9- 1. They are differential input terminals. 2. The functions of the terminals:  Motion control:

The terminals are for a manual pulse generator.  High-speed count:  The terminals are for counter 0.  X0.8+ and X0.8- are the A-phase input terminals for counter 0, and X0.9+ and X0.9- are the B-phase input terminals for counter 0.  High-speed comparison and catch: The terminals can function as trigger signals for high-speed catches.  Interrupt input terminals 200 kHz 15 mA 5~24 V