Mitsubishi — 5.10.1 Specifications for Motion Control Modules

AH500 Hardware Manual 5-70 Terminal Description c Response c Maximum input haracteristi Curren t Voltage X0.10, X0.11, X0.12, X0.13, X0.14, X0.15, X1.0, and X1.1 1 They are single/A/B-phase input terminals. 2 The functions of the terminals:  Motion control: X0.10 is LSP0, X0.11 is LSN0, X0.12 is LSP1, X0.13 is LSN1, X0.14 is LSP2, X0.15 is LSN2, X1.0 is LSP3, and X1.1 is LSN3.  High-speed count:  The terminals are for counter 1~counter 5.  X0.10 is the A-phase input for counter 1. X0.12 is the A-phase input for counter 2 and counter 4. X0.14 is the A-phase input for counter 3 and counter 5.  X0.11is the B-phase input for counter 1. X0.13 is the B-phase input for counter 2 and counter 4.

X0.15 is the B-phase input for counter 3 and counter 5.  High-speed comparison and catch: The terminals can function as trigger signals for high-speed catches.  Interrupt input terminals: X0.10~X0.15 100 kHz (*1) 15 mA 24 V X1.2, X1.3, X1.4, 1. They are single/A/B-phase input terminals. 100 kHz (*1) 15 mA 24 V and X1.5 Y0.8, Y0.9, Y0.10, and Y0.11 1. The high-speed pulse output terminals are transistors whose collectors are open collector. 2. The function of the terminals:  Motion control: The terminals are the CLEAR output terminals for axis 1~axis 4.  High-speed comparison and catch: The terminals can function as high-speed comparison output terminals.

200 kHz 15 mA 24 V Y0.0+, Y0.0-, Y0.1+, Y0.1-, Y0.2+, Y0.2-, Y0.3+, Y0.3-, Y0.4+, Y0.4-, Y0.5+, Y0.5-, Y0.6+, Y0.6-, Y0.7+, and Y0.7- 1. They are differential output terminals. 2. The function of the terminals:  Motion control:  The terminals are for axis 1~axis 4.  Y0.0+ and Y0.0- are the A-phase output terminals for axis 1. Y0.2+ and Y0.2- are the A-phase the output terminals for axis 2. Y0.4+ and Y0.4- are the A-phase output terminals for axis 3. Y0.6+ and Y0.6- are the A-phase output terminals for axis 4.  Y0.1+ and Y0.1- are the B-phase output terminals for axis 1. Y0.3+ and Y0.3- are the B-phase output terminals for axis 2.

Y0.5+ and Y0.5- are the B-phase output terminals for axis 3. Y0.7+ and Y0.7- are the B-phase output terminals for axis 4.  Y0.0+ and Y0.0- are the CLEAR output terminals for axis 5. Y0.1+ and Y0.1- are the CLEAR output terminals 1 MHz 5 mA 5 V