Mitsubishi — 9.1.2 ERROR LED Indicator’s Blinking

AH500 Hardware Manual 9-8 Error Description Remedy code 16#6002 Illegal netmask address (SM1107) 1. Check the program and the related special data registers. 2. Set the Ethernet parameter for the CPU module in HWCONFIG again. 16#6003 Illegal gateway mask (SM1107) 1. Check the program and the related special data registers. 2. Set the Ethernet parameter for the CPU module in HWCONFIG again. 16#6004 The IP address filter is set incorrectly. (SM1108) Set the Ethernet parameter for the CPU module in HWCONFIG again. 16#6006 The static ARP table is set incorrectly. (SM1108) Set the Ethernet parameter for the CPU module in HWCONFIG again. 16#6007 The NTP client service is set incorrectly.

Please check the setting of the NTP client service, and download it again. 16#6008 Illegal network number (SM1107) Check the network configuration in NWCONFIG, and download it again. 16#6009 Illegal node number (SM1107) Check the network configuration in NWCONFIG, and download it again. 16#600F The DNS is set incorrectly. (SM1107) Set the DNS again and download it again. 16#6101 The trigger in the email is set incorrectly. (SM1112) Set the Ethernet parameter for the CPU module in HWCONFIG again. 16#6102 The interval of sending the email is set incorrectly. (SM1112) Set the Ethernet parameter for the CPU module in HWCONFIG again.

16#6103 The device containing the data specified as the attachment exceeds the device range. (SM1112) Set the Ethernet parameter for the CPU module in HWCONFIG again. 16#6106 The SMTP server address is incorrect. (SM1112) Make sure that the address is correct, and set the Ethernet parameter for the CPU module in HWCONFIG again. 16#6108 SMTP authentication error (SM1112) Check the user name, and the password. Set the Ethernet parameter for the CPU module in HWCONFIG again. 16#6110 The SMTP server needs to be authenticated. (SM1112) Check the user name, and the password. Set the Ethernet parameter for the CPU module in HWCONFIG again. 16#6111 The specified email address does not exist.

(SM1112) 1. Check whether the email address is correct. 2. Set the Ethernet parameter for the CPU module in HWCONFIG again. 16#6200 The remote IP address set in the TCP socket function is illegal. (SM1196) 1. Check the program and the related special data registers. 2. Set the Ethernet parameter for the CPU module in HWCONFIG again. 16#6209 The remote IP address set in the UDP socket function is illegal. (SM1196) 1. Check the program and the related special data registers. 2. Set the Ethernet parameter for the CPU module in HWCONFIG again. 16#6300 Only auxiliary relays, data registers, and link registers can be used in the Ether Link.

Check the setting of the Ether Link in NWCONFIG, and download it again. 16#6301 The device used in the Ether Link exceeds the device range. Check whether the device used in the Ether Link is within the device range supported by the CPU module.