Mitsubishi — 9.1.6 Others

AH500 Hardware Manual 9-20 Error Description Remedy code 16#9A1A The setting of the data exchange for slave 26 in the PLC Link is incorrect. (SM1590) 1. Check the program and the related special data registers. 2. Set the PLC Link parameter in HWCONFIG again. 16#9A1B The setting of the data exchange for slave 27 in the PLC Link is incorrect. (SM1590) 1. Check the program and the related special data registers. 2. Set the PLC Link parameter in HWCONFIG again. 16#9A1C The setting of the data exchange for slave 28 in the PLC Link is incorrect. (SM1590) 1. Check the program and the related special data registers. 2. Set the PLC Link parameter in HWCONFIG again.

16#9A1D The setting of the data exchange for slave 29 in the PLC Link is incorrect. (SM1590) 1. Check the program and the related special data registers. 2. Set the PLC Link parameter in HWCONFIG again. 16#9A1E The setting of the data exchange for slave 30 in the PLC Link is incorrect. (SM1590) 1. Check the program and the related special data registers. 2. Set the PLC Link parameter in HWCONFIG again. 16#9A1F The setting of the data exchange for slave 31 in the PLC Link is incorrect. (SM1590) 1. Check the program and the related special data registers. 2. Set the PLC Link parameter in HWCONFIG again. 16#9A20 The setting of the data exchange for slave 32 in the PLC Link is incorrect.

(SM1590) 1. Check the program and the related special data registers. 2. Set the PLC Link parameter in HWCONFIG again. 16#9A21 An error occurs when the master communicates with slave 1 in the PLC Link. (SM1591) 1. Check the communication setting in the master, and the communication setting in slave 1. 2. Check the communication cable. 16#9A22 An error occurs when the master communicates with slave 2 in the PLC Link. (SM1591) 1. Check the communication setting in the master, and the communication setting in slave 2. 2. Check the communication cable. 16#9A23 An error occurs when the master communicates with slave 3 in the PLC Link. (SM1591) 1.

Check the communication setting in the master, and the communication setting in slave 3. 2. Check the communication cable. 16#9A24 An error occurs when the master communicates with slave 4 in the PLC Link. (SM1591) 1. Check the communication setting in the master, and the communication setting in slave 4. 2. Check the communication cable. 16#9A25 An error occurs when the master communicates with slave 5 in the PLC Link. (SM1591) 1. Check the communication setting in the master, and the communication setting in slave 5. 2. Check the communication cable. 16#9A26 An error occurs when the master communicates with slave 6 in the PLC Link. (SM1591) 1.

Check the communication setting in the master, and the communication setting in slave 6. 2. Check the communication cable. 16#9A27 An error occurs when the master communicates with slave 7 in the PLC Link. (SM1591) 1. Check the communication setting in the master, and the communication setting in slave 7. 2. Check the communication cable. 16#9A28 An error occurs when the master communicates with slave 8 in the PLC Link. (SM1591) 1. Check the communication setting in the master, and the communication setting in slave 8. 2. Check the communication cable. 16#9A29 An error occurs when the master communicates with slave 9 in the PLC Link. (SM1591) 1.

Check the communication setting in the master, and the communication setting in slave 9. 2. Check the communication cable. 16#9A2A An error occurs when the master communicates with slave 10 in the PLC Link. (SM1591) 1. Check the communication setting in the master, and the communication setting in slave 10. 2. Check the communication cable. 16#9A2B An error occurs when the master communicates with slave 11 in the PLC Link. (SM1591) 1. Check the communication setting in the master, and the communication setting in slave 11. 2. Check the communication cable.