Chapter 9 Troubleshooting 9-25 16#9B2F An error occurs when COM2 communicates with slave 15 by Modbus. 1. Check the communication setting in the master, and the communication setting in slave 15. 2. Check the communication cable. 16#9B30 An error occurs when COM2 communicates with slave 16 by Modbus. 1. Check the communication setting in the master, and the communication setting in slave 16. 2. Check the communication cable. 16#9B31 An error occurs when COM2 communicates with slave 17 by Modbus. 1. Check the communication setting in the master, and the communication setting in slave 17. 2. Check the communication cable. 16#9B32 An error occurs when COM2 communicates with slave 18 by Modbus.
1. Check the communication setting in the master, and the communication setting in slave 18. 2. Check the communication cable. 16#9B33 An error occurs when COM2 communicates with slave 19 by Modbus. 1. Check the communication setting in the master, and the communication setting in slave 19. 2. Check the communication cable. 16#9B34 An error occurs when COM2 communicates with slave 20 by Modbus. 1. Check the communication setting in the master, and the communication setting in slave 20. 2. Check the communication cable. 16#9B35 An error occurs when COM2 communicates with slave 21 by Modbus. 1. Check the communication setting in the master, and the communication setting in slave 21. 2.
Check the communication cable. 16#9B36 An error occurs when COM2 communicates with slave 22 by Modbus. 1. Check the communication setting in the master, and the communication setting in slave 22. 2. Check the communication cable. 16#9B37 An error occurs when COM2 communicates with slave 23 by Modbus. 1. Check the communication setting in the master, and the communication setting in slave 23. 2. Check the communication cable. 16#9B38 An error occurs when COM2 communicates with slave 24 by Modbus. 1. Check the communication setting in the master, and the communication setting in slave 24. 2. Check the communication cable. 16#9B39 An error occurs when COM2 communicates with slave 25 by Modbus.
1. Check the communication setting in the master, and the communication setting in slave 25. 2. Check the communication cable. 16#9B3A An error occurs when COM2 communicates with slave 26 by Modbus. 1. Check the communication setting in the master, and the communication setting in slave 26. 2. Check the communication cable. 16#9B3B An error occurs when COM2 communicates with slave 27 by Modbus. 1. Check the communication setting in the master, and the communication setting in slave 27. 2. Check the communication cable. 16#9B3C An error occurs when COM2 communicates with slave 28 by Modbus. 1. Check the communication setting in the master, and the communication setting in slave 28. 2.
Check the communication cable. 16#9B3D An error occurs when COM2 communicates with slave 29 by Modbus. 1. Check the communication setting in the master, and the communication setting in slave 29. 2. Check the communication cable. 16#9B3E An error occurs when COM2 communicates with slave 30 by Modbus. 1. Check the communication setting in the master, and the communication setting in slave 30. 2. Check the communication cable. 16#9B3F An error occurs when COM2 communicates with slave 31 by Modbus. 1. Check the communication setting in the master, and the communication setting in slave 31. 2. Check the communication cable. 16#9B40 An error occurs when COM2 communicates with slave 32 by Modbus.
1. Check the communication setting in the master, and the communication setting in slave 32. 2. Check the communication cable.