AH500 Hardware Manual 9-26 16#9B41 COM2 receives no response from slave 1 by Modbus. 1. Check the communication setting in the master, and the communication setting in slave 1. 2. Check the communication cable. 16#9B42 COM2 receives no response from slave 2 by Modbus. 1. Check the communication setting in the master, and the communication setting in slave 2. 2. Check the communication cable. 16#9B43 COM2 receives no response from slave 3 by Modbus. 1. Check the communication setting in the master, and the communication setting in slave 3. 2. Check the communication cable. 16#9B44 COM2 receives no response from slave 4 by Modbus. 1.
Check the communication setting in the master, and the communication setting in slave 4. 2. Check the communication cable. 16#9B45 COM2 receives no response from slave 5 by Modbus. 1. Check the communication setting in the master, and the communication setting in slave 5. 2. Check the communication cable. 16#9B46 COM2 receives no response from slave 6 by Modbus. 1. Check the communication setting in the master, and the communication setting in slave 6. 2. Check the communication cable. 16#9B47 COM2 receives no response from slave 7 by Modbus. 1. Check the communication setting in the master, and the communication setting in slave 7. 2. Check the communication cable.
16#9B48 COM2 receives no response from slave 8 by Modbus. 1. Check the communication setting in the master, and the communication setting in slave 8. 2. Check the communication cable. 16#9B49 COM2 receives no response from slave 9 by Modbus. 1. Check the communication setting in the master, and the communication setting in slave 9. 2. Check the communication cable. 16#9B4A COM2 receives no response from slave 10 by Modbus. 1. Check the communication setting in the master, and the communication setting in slave 10. 2. Check the communication cable. 16#9B4B COM2 receives no response from slave 11 by Modbus. 1.
Check the communication setting in the master, and the communication setting in slave 11. 2. Check the communication cable. 16#9B4C COM2 receives no response from slave 12 by Modbus. 1. Check the communication setting in the master, and the communication setting in slave 12. 2. Check the communication cable. 16#9B4D COM2 receives no response from slave 13 by Modbus. 1. Check the communication setting in the master, and the communication setting in slave 13. 2. Check the communication cable. 16#9B4E COM2 receives no response from slave 14 by Modbus. 1. Check the communication setting in the master, and the communication setting in slave 14. 2. Check the communication cable.
16#9B4F COM2 receives no response from slave 15 by Modbus. 1. Check the communication setting in the master, and the communication setting in slave 15. 2. Check the communication cable. 16#9B50 COM2 receives no response from slave 16 by Modbus. 1. Check the communication setting in the master, and the communication setting in slave 16. 2. Check the communication cable. 16#9B51 COM2 receives no response from slave 17 by Modbus. 1. Check the communication setting in the master, and the communication setting in slave 17. 2. Check the communication cable. 16#9B52 COM2 receives no response from slave 18 by Modbus. 1.
Check the communication setting in the master, and the communication setting in slave 18. 2. Check the communication cable.