Chapter 9 Troubleshooting 9.2 Troubleshooting for I/O Modules Introduction of modules Digital I/O modules, analog I/O modules, network modules, temperature measurement modules, and motion control modules can be installed in an AH500 system. Please refer to AH500 Module Manual for more information about the specifications for I/O modules. The error codes and the remedies for the errors are listed below. 9-27 16#9B53 COM2 receives no response from slave 19 by Modbus. 1. Check the communication setting in the master, and the communication setting in slave 19. 2. Check the communication cable. 16#9B54 COM2 receives no response from slave 20 by Modbus. 1.
Check the communication setting in the master, and the communication setting in slave 20. 2. Check the communication cable. 16#9B55 COM2 receives no response from slave 21 by Modbus. 1. Check the communication setting in the master, and the communication setting in slave 21. 2. Check the communication cable. 16#9B56 COM2 receives no response from slave 22 by Modbus. 1. Check the communication setting in the master, and the communication setting in slave 22. 2. Check the communication cable. 16#9B57 COM2 receives no response from slave 23 by Modbus. 1. Check the communication setting in the master, and the communication setting in slave 23. 2. Check the communication cable.
16#9B58 COM2 receives no response from slave 24 by Modbus. 1. Check the communication setting in the master, and the communication setting in slave 24. 2. Check the communication cable. 16#9B59 COM2 receives no response from slave 25 by Modbus. 1. Check the communication setting in the master, and the communication setting in slave 25. 2. Check the communication cable. 16#9B5A COM2 receives no response from slave 26 by Modbus. 1. Check the communication setting in the master, and the communication setting in slave 26. 2. Check the communication cable. 16#9B5B COM2 receives no response from slave 27 by Modbus. 1.
Check the communication setting in the master, and the communication setting in slave 27. 2. Check the communication cable. 16#9B5C COM2 receives no response from slave 28 by Modbus. 1. Check the communication setting in the master, and the communication setting in slave 28. 2. Check the communication cable. 16#9B5D COM2 receives no response from slave 29 by Modbus. 1. Check the communication setting in the master, and the communication setting in slave 29. 2. Check the communication cable. 16#9B5E COM2 receives no response from slave 30 by Modbus. 1. Check the communication setting in the master, and the communication setting in slave 30. 2. Check the communication cable.
16#9B5F COM2 receives no response from slave 31 by Modbus. 1. Check the communication setting in the master, and the communication setting in slave 31. 2. Check the communication cable. 16#9B60 COM2 receives no response from slave 32 by Modbus. 1. Check the communication setting in the master, and the communication setting in slave 32. 2. Check the communication cable.