Chapter 3 Specifications for Products 3-9 Number Name Description 1 Mounting hole Fixing the backplane 2 Extension port It is connected to an inferior backplane. 3 Mounting hole After a module is installed, it is fixed by a screw. 4 Connector Connecting the backplane and a power supply module 5 Connector Connecting the backplane and a CPU module 6 Connector Connecting the backplane and an input/output module 7 Hole The projection under a module is inserted into this hole. 8 Mounting clip Hanging a backplane on a DIN rail 9 Mounting hole After a mounting clip is installed, it is fixed by screws. 10 Locating hole A mounting clip is pressed into these locating holes.