AH500 Hardware Manual Profile of the extension backplane AHBP08E1-5A 2 4 5 6 1 1 3-10 8 7 9 8 8 10 Number Name Description 1 Mounting hole Fixing the backplane 2 Extension port 1 It is connected to a superior backplane. 3 Extension port 2 It is connected to an inferior backplane. 4 Connector Connecting the backplane and a power supply module 5 Connector Connecting the backplane and an input/output module 6 Mounting hole After a module is installed, it is fixed by a screw. 7 Hole The projection under a module is inserted into this hole. 8 Mounting clip Hanging a backplane on a DIN rail 9 Mounting hole After a mounting clip is installed, it is fixed by screws.
10 L ocating hole A mounting clip is pressed into these locating holes.