Mitsubishi — 3.6.1 General Specifications

Chapter 3 Specifications for Products  AH04DA-5A/ AH08DA-5A/AH08DA-5B/AH08DA-5C Electrical specifications 3-41 Analog-to-digital Voltage input conversion temperature) Linearity error ±0.12% (Full temperature range) Hardware 16 bits resolution Input impedance >200 kΩ Absolute input ±15 V range Analog-to-digital Current input conversion Rated input range ±20 mA 0 mA~20 mA 4 mA~20 mA Hardware input -20.2 mA~20.2 mA -0.2 mA~20.2 mA 3.8 mA~20.2 mA range Fiducial error ±0.1% (Room temperature) (The number of input currents which are averaged is 100.) Fiducial error ±0.2% (Full temperature range) (The number of input currents which are averaged is 100.) Linearity error ±0.05% (Room temperature) (Full temperature range) Linearity error ±0.23% Hardware 16 bits resolution Input impedance 250 Ω Absolute input ±32 mA range Module name AH04DA-5A AH08DA-5A AH08DA-5B AH08DA-5C Number of outputs 4 8 8 8 Analog-to-digital Voltage output/ Current output Voltage output/ Current outpu Voltage output Current output conversion Supply voltage 24 VDC (20.4 VDC~28.8 VDC) (-15%~+20%) Connector type Removable terminal block Conversion time 150 μs/channel An analog circuit is isolated from a digital circuit by a digital integrated circuit/an optocoupler, but the analog channels are not isolated from one another.

Isolation between a digital circuit and a ground: 500 VDC Isolation between an analog circuit and a ground: 500 VDC Isolation