AH500 Module Manual IEC60870-5-104 Functions CR#512~CR#513: set up the IP address of the 1 st remote device in hexadecimal. The same rule applies to 2 nd ~ 16 th remote devices. CR#514: set up the common ASDU address of the 1 st remote device in hexadecimal. Example: to set up the IP address as 192.168.0.2, users need to write 16#0002 in CR#512, 16#C0A8 in CR#513. (K192=16#C0, K168=16#A8, K0=16#00 and K2=16#02) CR#608: one bit represents one connection of a remote device; input value 0: to disconnect and input value 1: to connect. CR#612: one word represents one connection of a remote device.
Input a command code to send the command and work with CR#644~CR#649 to write the parameters in. The same rule applies to 2 nd ~ 16 th remote devices. Example: to send command C_SC_NA_1 ON to the IOA 100 (information object address) of first connection for a remote device, users can input the corresponding value to trigger and send the command. Refer to section 9.3.5 for details on type id parameters and codes.
9-12 corresponding to the master connection 4 #736 ~ #724 R/W CPU register number corresponding to the master connection 5 #749 ~ #737 R/W CPU register number corresponding to the master connection 6 #762 ~ #750 R/W CPU register number corresponding to the master connection 7 #775 ~ #763 R/W CPU register number corresponding to the master connection 8 #788 ~ #776 R/W CPU register number corresponding to the master connection 9 #801 ~ #789 R/W CPU register number corresponding to the master connection 10 #814 ~ #802 R/W CPU register number corresponding to the master connection 11 #827 ~ #815 R/W CPU register number corresponding to the master connection 12 #840 ~ #828 R/W CPU register number corresponding to the master connection 13 #853 ~ #841 R/W CPU register number corresponding to the master connection 14 #866 ~ #854 R/W CPU register number corresponding to the master connection 15 #879 ~ #867 R/W CPU register number corresponding to the master connection 16