Kaiyi — 13.7.3 Options Setting of I/O Data When AH10PFBS-5A is Offline

AH500 Module Manual Take Siemens S7-300 as the master and set slot 0 according to the above figure. The mapping relations between the master and AH10PFBS-5A are listed as the following table. 13.7.3 Options Setting of I/O Data When AH10PFBS-5A is Offline When users configure AH10PFBS-5A in the PROFIBUS-DP master configuration software and AH10PFBS-5A and PROFIBUS-DP master are disconnected, choose “Clear I/O data” or “Hold I/O data”. Double click AH10PFBS-5A icon and “Properties—DP slave” dialog box pops up as below.

13-10 Item Indication Default value input D mapping (Slave->Master) The starting D register number in the input area 0 (Able to be changed through the keyboard) output D mapping (Master->Slave) The starting D register number in the output area 100 (Able to be changed through the keyboard) Register in S7-300 master PROFIBUS-DP network Corresponding registers in data transmission direction the AH500 series CPU module PQW256 D100 PQW258 D101 PIW256 D0 PIW258 D1