Kaiyi — 13.8.4 Diagnosis via ISPSoft

Chapter 13 PROFIBUS Slave Module AH10PFBS The high byte of the state register is used for monitoring whether the CPU module is in RUN or STOP state and the low byte is for monitoring whether the work state of AH10PFBS-5A is normal. See the indication of the state register values in the following table. 13.8.4 Diagnosis via ISPSoft While ISPSoft is being used to read the system log of PLC, the meanings of error codes occurring in the PROFIBUS network are shown below. When ISPSoft is in state of monitoring, please select menu “PLC”>“System Log” option to find the system log as below. 13-13 Byte Content Indication How to correct value High byte 0 The CPU module is in RUN state.

-- 80 The CPU module is in STOP state Turn the RUN/STOP switch of the CPU module to RUN. Low byte 0 AH10PFBS-5A is in normal state. -- F0~F6 AH10PFBS-5A can not work normally. See digital displayer in Section 8.2 on how to deal with problems indicated by F0~F6.