Kaiyi — 15.4.2 Using CANopen Builder to Configure a Network

AH500 Module Manual The parameters are described below. 15-12 Parameter name Description Remark Node Guarding Guard Time A master station polls slave stations according to the interval set in the Guard Time box. If the Heartbeat option button is selected, the Node Guarding option button can not be selected. Life Time Factor Life time=Guard time×Life time factor If a slave station does not respond to a master station in a life time, the master station will consider the slave station offline. Heartbeat Node Heartbeat Producer Time A slave station send a heartbeat message to a master station according to the time set in the Node Heartbeat Producer Time box.

The time set in the Master Consumer Timeout box must be greater than the time set in the Node Heartbeat Producer Time box. Master Consumer Timeout If a master station does not receive a heartbeat message from a slave station after the timeout period set in the Master Consumer Timeout box, the master station will consider the slave station offline. Node List All the nodes configured on the CANopen network created are shown on the node list. -- Heartbeat consumer The node which is assigned an error control protocol can monitor whether the nodes under Heartbeat consumer are offline. The number of nodes under Heartbeat consumer varies with the device used.

After users select a node on the node list, and click , the node selected will be added to the list under Heartbeat consumer. -- After the users select a node on the list under Heartbeat consumer, and click , the node selected will be deleted from the list under Heartbeat consumer. -- Edit… After users select a node on the list under Heartbeat consumer, and click Edit…, they can change the time set in the --