Chapter 15 CANopen Communication Module AH10COPM Auto SDO Configuration : After users click Auto SDO Configuration in the Node Configuration… window, the Auto SDO Configuration window will appear. If the users click Add , they can add an automatic SDO. If the users click Edit… , they can modify the automatic SDO selected. The maximum number of automatic SDOs which can be assigned to a slave station is 20. An automatic SDO can only write parameters, and can not read parameters. It writes parameters to a slave station once only when the slave station is ready to operate for the first time. After the users click Add , the Add New SDO window will appear.
The index in the Index (hex) box is the index of the parameter which will be accessed, and the subindex in the Sub-Index (hex) box is the subindex of the parameter which will be accessed. The length in the Length (dec ) box is determined by the data type of the parameter which will be , and select an object in the object dictionary defined by the EDS in the slave station selected. After the users click OK , the software will automatically bring out an index, a subindex, and a length. accessed. A byte is a unit of measurement for length. The users can click 15-13 Parameter name Description Remark Consume Time box. OK After users click OK, they will return to the Node Configuration…
window, and the parameters set in the Error Control Setting window will be retained. -- Cancel After users click Cancel, they will return to the Node Configuration… window, and the parameters set in the Error Control Setting window will not take effect. --